Installation Guide

STEP 1
1. Attach 1 magnet plate (F) to left door (1) by inserting 1 screw (D) through hole on magnet
plate (F), then tighten to left door (1).
2. Attach 1 handle (K) to left door (1) by inserting 2 machine screws (J) through holes on left
door (1), then tighten to handle (K).
3. Repeat above steps to assemble another magnet plate (F) and handle (K) to right door (2).
STEP 2
1. Insert 2 wood dowels (A) into dowel holes on right support board (13) .
2. Screw 3 cam bolts (B) into cam bolt holes on right support board (13).
3. Attach 2 hinges (E) to right support board (13) by inserting 4 screws (D) through holes on
hinges (E), then tighten to right support board (13).
4. Repeat above steps to assemble left support board (14) and another 2 hinges (E).