Installation Guide

STEP 12
Option #1: Securing to Drywall
1. Position spacesaver against wall in desired location. Using a pencil, make 2 small marks on
wall through holes on brackets (P). Move cabinet away from wall and screw 2 plastic anchors
(L) into wall on pencil marks.
2. Place cabinet against wall, insert 2 screws (M) through holes on brackets (P), then tighten
to plastic anchors (L).
Option #2: Securing to Drywall and Wood Stud
1. Position spacesaver against wall in desired location. Insert 2 screws (M) through holes on
brackets (P), then tighten through drywall and into wood stud.
*Tip: Anchor bracket (P) can be adjusted to correct distance from wall to cabinet as needed. Once adjusted,
be sure to re-tighten bracket inside cabinet for stability.
STEP 13
1. Insert 4 shelf holders (I) into holes on upper left side panel (4) and upper right side panel
(3) at desired shelf height.
2. Place adjustable shelf (12) onto shelf holders (I).