Installation Guide

STEP 11
1. Attach both doors (14), (15) to bottom shelf (8) by inserting pins into holes on bottom shelf (8).
2. Slide upper back panel (16) into grooves on top left side panel (3), top right side panel (4)
and top board (1).
3. Slide large back panel (13) into grooves on top left side panel (3) and top right side panel (4).
4. Attach top board (1) to top left side panel (3) and top right side panel (4) by inserting cam
bolts into cam lock holes, wood dowels into dowel holes on top left side panel (3) and top
right side panel (4), and inserting pins into pin holes on top board (1).
5. Insert 4 cam locks (B) into cam lock holes on top left side panel (3) and top right side
panel (4) separately and rotate clockwise to secure cam bolts.
STEP 12
1. Attach bottom left side panel (5) to rear bottom cross bar (9), front top cross bar (11) and
rear top cross bar (17) by inserting wood dowels into dowel holes on rear bottom cross
bar (9), front top cross bar (11) and rear top cross bar (17).
2. Insert 3 screws (Q) through holes on bottom left side panel (5) and tighten to rear bottom
cross bar (9), front top cross bar (11) and rear top cross bar (17) using Allen wrench (R).
3. Repeat above steps to attach bottom right side panel (6) to rear bottom cross bar (9),
front top cross bar (11) and rear top cross bar (17).
4. Insert 2 wood dowels (C) into dowel holes on front top cross bar (11) and rear top cross
bar (17).