ASSEMBLY INSTRUCTIONS RiverRidge® Ellsworth Two Door Spacesaver ITEM #: 06-031 White ITEM #: 06-032 Espresso ADULT ASSEMBLY REQUIRED This product requires assembly by an adult because of small parts. Care should be taken in unpacking and assembling this item to keep small parts away from children. During assembly children should be kept away from the product due to possible risk of injury. WARNING SEE FULL WARNING ON PAGE 2 Young children can be seriously injured or killed if furniture tips over.
THIS SHELF UNIT WILL HOLD UP TO 25 POUNDS PER SHELF OR A TOTAL OF 75 POUNDS. DO NOT LOAD EACH SHELF WITH MORE THAN 25 POUNDS. IF LOADED WITH MORE THAN 25 POUNDS PER SHELF AS THIS MAY CAUSE DAMAGE TO THE SHELF AND MAY CAUSE SERIOUS INJURY OR DEATH.
PARTS LIST NO QTY DESCRIPTION 1 1PC Top Board 2 1PC Middle Connection Board 3 1PC Top Left Side Panel 4 1PC Top Right Side Panel 5 1PC Bottom Left Side Panel 6 1PC Bottom Right Side Panel 7 1PC Top Shelf 8 1PC Bottom Shelf 9 1PC Rear Bottom Cross Bar 11 1PC Front Top Cross Bar 12 1PC Small Back Panel 13 1PC Large Back Panel 14 1PC Right Side Door 15 1PC Left Side Door 16 1PC Upper Back Panel 17 1PC Rear Top Cross Bar
PARTS LIST NO A B C D E PARTS QTY DESCRIPTION 12PCS Cam Bolt 12PCS Cam Lock 34PCS Wood Dowel 1PC Magnet 2PCS Magnet Plate F 2PCS Plastic Anchor G 2PCS Screw (4x30mm) H 2PCS Knob J 2PCS Machine Screw (4x18mm) K 4PCS Metal Pin M O 2PCS 2PCS Screw (3x14mm) P 4PCS Screw (4x35mm) Q 6PCS Long Machine Screw R 1PC Allen Wrench S 2PCS Adjustable Anchor Bracket T 2PCS Screw (4x10mm) Screw (3x10mm) TOOLS NEEDED FOR ASSEMBLY: FLAT & PHILLIPS SCREWDRIVER (NOT INCLUDED) THE
STEP 1 1. 2. 3. 4. Screw 4 cam bolts (A) into cam bolt holes on top board (1). Insert 4 wood dowels (C) into dowel holes on top board (1). Attach magnet (D) to top board (1) by inserting 2 screws (O) through holes on magnet (D) and tighten to top board (1). Insert 2 screws (T) through holes on adjustable anchor brackets (S), then tighten to top board (1). STEP 2 1. 2. Screw 4 cam bolts (A) into cam bolt holes on middle connection board (2).
STEP 3 1. 2. Screw 2 cam bolts (A) into cam bolt holes on top left side panel (3). Insert 4 wood dowels (C) into dowel holes on top left side panel (3). STEP 4 1. 2. Screw 2 cam bolts (A) into cam bolt holes on top right side panel (4). Insert 4 wood dowels (C) into dowel holes on top right side panel (4).
STEP 5 1. Insert 8 wood dowels (C) into dowel holes on bottom left side panel (5). STEP 6 1. Insert 8 wood dowels (C) into dowel holes on bottom right side panel (6).
STEP 7 1. 2. 3. 4. Insert 1 screw (M) through hole on magnet plate (E) and tighten to left side door (15). Attach knob (H) to left side door (15) by inserting 1 screw (J) through hole on left side door (15) and tighten to knob (H). Insert 2 pins (K) into holes on each end of left side door (15). Repeat above steps to assemble right side door (14). STEP 8 1. 2.
STEP 9 1. Slide small back panel (12) into grooves on top right side panel (4), top shelf (7) and bottom shelf (8). STEP 10 1. 2. Attach top left side panel (3) to pre-assembled top shelf (7) and bottom shelf (8) by inserting cam bolts into cam lock holes and inserting wood dowels into dowel holes on top shelf (7) and bottom shelf (8). Insert 2 cam locks (B) into cam lock holes on the bottom shelf (8) and rotate clockwise to secure cam bolts.
STEP 11 1. 2. 3. 4. 5. Attach both doors (14), (15) to bottom shelf (8) by inserting pins into holes on bottom shelf (8). Slide upper back panel (16) into grooves on top left side panel (3), top right side panel (4) and top board (1). Slide large back panel (13) into grooves on top left side panel (3) and top right side panel (4).
STEP 13 1. Attach middle connection board (2) to bottom left side panel (5) and bottom right side panel (6), front top cross bar (11) and rear top cross bar (17) by inserting wood dowels into dowel holes on middle connection board (2). STEP 14 1. Insert 4 screws (P) through holes on middle connection board (2) and tighten to bottom left side panel (5) and bottom right side panel (6).
STEP 15 1. Place top portion onto middle connection board (2) by inserting wood dowels into dowel holes and cam bolts into cam lock holes on end of both top side panels (3) and (4). 2. Insert 4 cam locks (B) into cam lock holes on both top side panel (3) and (4) and rotate clockwise to secure cam bolts. STEP 16 Option #1: Securing to Drywall 1. Position spacesaver against wall in desired location. Using a pencil, make 2 small marks on wall through holes on brackets (S).
ATTENTION ADULTS: Cabinet should be checked periodically for damage or loose screws/parts. Take appropriate action necessary to correct hazards such as tightening of screws and taking any damaged parts away from children. WARNING Please make sure your item is secured to the wall, per assembly instructions. CARE INSTRUCTIONS: Wipe clean with a water dampened cloth. Wipe dry with clean cloth. IMPORTANT: Keep assembly instructions for future reference.
Enjoy your new RiverRidge® Cabinet! Thank you for purchasing this RiverRidge® Home item. We hope you enjoy it and consider purchasing other RiverRidge® items. To order replacement parts at no cost to you, email customer.service@ssi-rr.com, call 1-(844)-223-5201 or order parts online at www.riverridgehome.com. Only valid in the United States. If purchased outside of the United States, please contact retailer where purchased. RiverRidge® is a registered trademark of Sourcing Solutions, Inc.
