Installation Guide
- 6 -
STEP 5
STEP 5
1. Insert 4pc wooden dowel (G) into the holes on the Rear bottom cross bar (8).
2. Attach 1 Left lower side frame (5) to the bottom board (3) and Rear lower cross bar (8) by
inserting the wooden dowel (G) into the holes on the Left lower side frame(5) and inserting 3
long wood screws (A) through the holes on the Left lower side frame (5) then tighten to the 2
cross bars (7) on the bottom board (3) and Rear lower cross bar(8) by using the Allen wrench (F).
3. Repeat the above steps to assemble right lower side frame (9) to 2 cross bars (7) on the bottom
board (3) and Rear lower cross bar(8).