Installation Guide

ManualsBrandsRiverRidge Home ManualsFurniture6-Cubby, 3-Shelf Corner Cabinet in White

ASSEMBLY INSTRUCTIONS

RiverRidge

Kids Corner Storage Cabinet

with Cubbies and Shelves

ITEM #: 02-144 White

ITEM #: 02-145 Gray

ADULT ASSEMBLY REQUIRED

This product requires assembly by an adult because of small parts. Care should be taken

in unpacking and assembling this item to keep small parts away from children. During assembly

children should be kept away from the product due to possible risk of injury.

WARNING SEE FULL WARNING ON PAGE 2

Young children can be seriously injured or killed if furniture tips over. Don’t use

this item for a TV stand or place heavy objects on top of item. Always use

angle-braces or anchors to secure furniture to the wall.

Summary of content (10 pages)

PAGE 1
ASSEMBLY INSTRUCTIONS RiverRidge® Kids Corner Storage Cabinet with Cubbies and Shelves ITEM #: 02-144 White ITEM #: 02-145 Gray ADULT ASSEMBLY REQUIRED This product requires assembly by an adult because of small parts. Care should be taken in unpacking and assembling this item to keep small parts away from children. During assembly children should be kept away from the product due to possible risk of injury.
PAGE 2
This product is suitable for children 3 years and older. EACH CABINET WILL HOLD UP TO 20 POUNDS PER CUBBY, 10 POUNDS PER CORNER SHELF AND 25 POUNDS PER TOP SHELF OR A TOTAL OF 175 POUNDS. DO NOT LOAD EACH CUBBY WITH MORE THAN 20 POUNDS, EACH CORNER SHELF WITH MORE THAN 10 POUNDS AND THE TOP SHELF WITH MORE THAN 25 POUNDS. THIS MAY CAUSE DAMAGE TO THE CABINET AND MAY CAUSE SERIOUS INJURY OR DEATH.
PAGE 3
PARTS LIST NO QTY DESCRIPTION 1 1PC Top Board 2 2PCS Middle Shelf 3 1PC Bottom Shelf 4 1PC Left Side Panel 5 1PC Right Side Panel 6 3PCS Vertical Support Board 7 3PCS Right Support Board 8 3PCS Left Support Board 9 1PC Middle Bottom Trim 10 1PC Left Bottom Trim 11 1PC Right Bottom Trim
PAGE 4
NO PARTS QTY DESCRIPTION A 21PCS Cam Bolt B 21PCS Cam Lock C 41PCS Wood Dowel D 2PCS Hinge E 8PCS Screw (3x10mm) F 35PCS Screw (4x35mm) G 2PCS Plastic Anchor H 2PCS Screw (4x45mm) TOOLS NEEDED FOR ASSEMBLY: FLAT & PHILLIPS SCREWDRIVER (NOT INCLUDED) THE USE OF A POWER SCREWDRIVER IS NOT RECOMMENDED FOR ASSEMBLY DO NOT USE ITEM IF ANY PARTS ARE MISSING OR DAMAGED To order replacement parts at no cost to you, email customer.service@ssi-rr.
PAGE 5
STEP 1 1. 2. 3. 4. 5. Screw 4 cam bolts (A) into cam bolt holes on top board (1). Insert 4 wood dowels (C) into wood dowel holes on top board (1). Screw 4 cam bolts (A) into cam bolt holes on middle shelf (2). Insert 4 wood dowels (C) into wood dowel holes on middle shelf (2). Repeat above steps for middle shelf (2). STEP 2 1. 2. 3. 4. 5. 6. Screw 6 cam bolts (A) into cam bolt holes on bottom shelf (3). Insert 4 wood dowels (C) into wood dowel holes on bottom shelf (3).
PAGE 6
STEP 3 1. 2. 3. 4. 5. 6. Screw 1 cam bolt (A) into cam bolt holes on vertical support board (6). Repeat above step for other 2 vertical support boards (6). Insert 2 wood dowels (C) into wood dowel holes on vertical support board (6). Attach 1 right support board (7) to vertical support board (6) by inserting wood dowels (C) into wood dowel holes and inserting cam bolt (A) into cam lock hole on right support board (7).
PAGE 7
STEP 5 1. 2. 3. 4. 5. Attach vertical support board (6) and right support board (7) to middle shelf (2) by inserting cam bolts (A) into cam lock holes on vertical support board (6) and right support board (7). Insert 4 cam locks (B) into cam lock holes on vertical support board (6) and right support board (7) and rotate clockwise to secure cam bolts in place. Insert 4 wood dowels (C) into wood dowel holes on vertical support board (6) and right support board (7).
PAGE 8
STEP 7 1. 2. 3. Attach left bottom trim (10), middle bottom trim (9) and right bottom trim (11) to bottom shelf (3) by inserting cam bolts (A) into cam lock holes on left bottom trim (10), middle bottom trim (9) and right bottom trim (11). Insert 6 cam locks (B) into cam lock holes on left bottom trim (10), middle bottom trim (9) and right bottom trim (11) and rotate clockwise to secure cam bolts in place.
PAGE 9
STEP 9 Option #1: Securing to Drywall 1. Position cabinet against wall in desired location. Using a pencil, make small marks on wall through holes on side panels. Move cabinet away from wall and screw 2 plastic anchors (G) into wall on pencil marks. 2. Place cabinet against wall, insert 2 screws (H) through holes on side panels, then tighten to plastic anchors (G). Option #2: Securing to Drywall and Wood Stud 1. Position cabinet against wall in desired location.
PAGE 10
Enjoy your new RiverRidge® Cabinet! Thank you for purchasing this RiverRidge® Home item. We hope you enjoy it and consider purchasing other RiverRidge® items. To order replacement parts at no cost to you, email customer.service@ssi-rr.com, call 1-(844)-223-5201 or order parts online at www.riverridgehome.com. Only valid in the United States. If purchased outside of the United States, please contact retailer where purchased. RiverRidge® is a registered trademark of Sourcing Solutions, Inc.