Installation Guide

STEP 11
1. Attach pre-assembled shelf #1 to pre-assembled left-side frame by inserting 2 machine screws (D)
through holes on left rail board (3) and tighten to pre-assembled left-side frame.
2. Repeat above step to assemble Shelf #2, #3, #4 to pre-assembled left-side frame.
STEP 12
1. Attach one bracket (J) to back of the ladder shelf by inserting 1 wood screw (G) through hole on
bracket (J) and tighten into hole on top rear rail board (1).
2. Drill hole on wall according to the height of bracket (J) and insert plastic anchor (H).
3. Attach one bracket (J) to plastic anchor (H) on wall by inserting 1 wall screw (F) through hole on
bracket (J) and tighten into plastic anchor (H).