Installation Guide

STEP 9
1.Insert 2 wood dowels (A) into wood dowel holes on top bar (14).
2.Screw 2 cam bolts (B) into pre-threaded holes on top bar (14).
3. Attach top bar (14) to left front leg (15) and left rear leg (16) by inserting wood dowels (A) into
wood dowel holes and inserting cam bolts (B) into cam lock holes on left front leg (15) and left
rear leg (16).
4. Insert 2 cam locks (C) into cam lock holes on left front leg (15) and left rear leg (16), then rotate
clockwise to secure cam bolts in place.
5. Repeat above steps to assemble another top bar (14) to right side front leg (17) and right side rear
leg (18).
STEP 10
1. Attach pre-assembled shelf #1 to pre-assembled right-side frame by inserting 2 machine screws (D)
through holes on right rail board (4) and tighten to pre-assembled right-side frame.
2. Repeat above step to assemble shelf #2, #3, #4 to pre-assembled right-side frame.