ASSEMBLY INSTRUCTIONS RiverRidge® 3 Tier Ladder Shelf ITEM #: 02-068/06-092 WHITE ITEM #: 02-069/06-093 GRAY ADULT ASSEMBLY REQUIRED This product requires assembly by an adult because of small parts. Care should be taken in unpacking and assembling this item to keep small parts away from children. WARNING SEE FULL WARNING ON PAGE 2 Young children can be seriously injured or killed if furniture tips over. Don’t use this item for a TV stand or place heavy objects on top of item.
THIS SHELF UNIT WILL HOLD UP TO 20 POUNDS PER SHELF OR A TOTAL OF 60 POUNDS. DO NOT LOAD EACH SHELF WITH MORE THAN 20 POUNDS OR 60 POUNDS TOTAL WEIGHT. IF OVERLOADED WITH MORE THAN 20 POUNDS PER SHELF OR 60 POUNDS TOTAL WEIGHT, SHELF MAY TIP FROM WALL AND CAUSE SERIOUS INJURY OR DEATH.
PARTS LIST NO A B C D E F G H J K 1 2 3 4 5 6 PARTS QTY DESCRIPTION 28 PCS WOOD DOWEL 4 PCS CAM BOLT 4 PCS CAM LOCK 12 PCS MACHINE SCREW (6 X 20MM) 27 PCS WOOD SCREW (3.
NO 6 7 8 9 10 11 12 13 14 15 PARTS QTY DESCRIPTION 1PC BOTTOM SHELF RIGHT RAIL BOARD 1PC TOP SHELF 2 PCS MIDDLE AND BOTTOM SHELF 2 PCS REAR RAIL BOARD 1PC OP REAR RAIL BOARD 2 PCS TOP BAR OF LEFT AND RIGHT SIDE FRAME 1PC LEFT SIDE FRONT LEG 1PC LEFT SIDE REAR LEG 1PC RIGHT SIDE FRONT LEG 1PC RIGHT SIDE REAR LEG TOOLS NEEDED FOR ASSEMBLY: FLAT & PHILLIPS SCREWDRIVER (NOT INCLUDED) THE USE OF POWER SCREWDRIVER IS NOT RECOMMENDED FOR ASSEMBLY TOOL NEEDED FOR SECURING TO WALL: POWER DRI
STEP 1 1. Insert 1 wood dowel (A) into wood dowel hole on end of top rear rail board (10). 2. Attach top shelf left rail board (1) to top rear rail board (10) by inserting wood dowel (A) into hole on top shelf left rail board (1). Make sure hole on top rear rail board (10) is facing towards back side of shelf. 3. Insert 1 wood screw (E) through hole on top shelf left rail board (1) and tighten to top rear rail board (10). 4.
STEP 3 1. Insert 1 wood dowel (A) into wood dowel hole on end of rear rail board (9). 2. Attach bottom shelf left rail board (5) to rear rail board (9) by inserting wood dowel (A) into hole on bottom shelf left rail board (5). 3. Insert 1 wood screw (E) through hole on bottom shelf left rail board (5) and tighten to rear rail board (9). 4. Repeat above steps to assemble bottom shelf right rail board (6) to rear rail board (9). STEP 4 1. Insert 6 wood dowels (A) into wood dowel holes on top shelf (7). 2.
STEP 5 1. Insert 6 wood dowels (A) into wood dowel holes on middle shelf (8). 2. Attach middle shelf (8) to middle shelf rail board assembly by inserting wood dowels (A) into the wood dowel holes on middle shelf left rail board (3), middle shelf right rail board (4) and rear rail board (9). 3. Insert 7 wood screws (E) through holes on middle shelf (8) and tighten to middle shelf left rail board (3), middle shelf right rail board (4) and rear rail board (9). STEP 6 1.
STEP 7 1. Insert 2 wood dowels (A) into wood dowel holes on top bar (11). 2. Screw 2 cam bolts (B) into pre-threaded holes on top bar (11). 3. Attach top bar (11) to left side front leg (12) and left side rear leg (13) by inserting wood dowels (A) into wood dowel holes and inserting 2 cam bolts (B) into cam lock holes on left side front leg (12) and left side rear leg (13). 4.
STEP 9 1. Attach pre-assembled top shelf（7）and rail boards to pre-assembled left-side frame by inserting 2 machine screws (D) through holes on left rail board (1) and tighten to pre-assembled left-side frame. 2. Repeat above step to assemble middle and bottom shelf (8) to pre-assembled left-side frame. STEP 10 1. Attach one bracket (J) to back of ladder shelf by inserting 1 wood screw (G) through hole on bracket (J) and tighten to back side of top rear rail board (10). 2.
STEP 11 1. Place ladder shelf against wall and close to bracket (J). 2. Insert plastic lock strap (K) through hole on bracket (J) assembled on ladder shelf, then through hole on bracket (J) on wall and fasten plastic lock strap (K) to secure two brackets (J) firmly together. ATTENTION ADULTS: Cabinet should be checked periodically for damage or loose screws/parts. Take appropriate action necessary to correct hazards such as tightening of screws and taking any damaged parts away from children.
Enjoy your new RiverRidge® Cabinet! Thank you for purchasing this RiverRidge® Home item. We hope you enjoy it and consider purchasing other RiverRidge® items. To order replacement parts at no cost to you, email customer.service@ssi-rr.com, call 1-(844)-223-5201 or order parts online at www.riverridgehome.com RiverRidge® is a registered trademark of Sourcing Solutions, Inc.
