Instructions / Assembly

STEP 7

1. Screw 8 cam bolts (B) into pre-threaded holes on top board (1).

2. Place the pre-assembled bench upright.

3. Insert 2 wood dowels (A) into holes on top end of right and left side panel (2), (3).

4. Attach top board (1) on the pre-assembled bench by inserting cam bolts into both side panels

and both middle support panels, also inserting wood dowels on both side panels into holes on top board.

5. Insert 2 cam bolts (C) into cam lock holes on left side panel then rotate clockwise to secure cam bolts in

place.

6. Repeat step 5 for secure cam bolts on 2 middle shelf and right side panel.

STEP 8

1. Attach back panel (6) to back of the bench.

2. Insert 16 screws (D) through holes on back panel then tighten to back of bench by using a Philips

screwdriver.