User's Manual

Wireless Array

Configuring the Wireless Array 203

10. Gateway: If the DHCP option is disabled, enter the IP gateway address

for this VLAN association.

11. Tunnel Server: If this VLAN is to be tunneled, enter the IP address or

host name of the tunnel server that will perform the tunneling. For more

information on virtual tunnels, please see “Understanding Virtual

Tunnels” on page 199.

12. Port: If this VLAN is to be tunneled, enter the port number of the tunnel

server.

13. New Secret: Enter the password expected by the tunnel server.

14. Delete: To delete the selected VLAN, simply click the Delete button to

remove the VLAN from the list.

15. Click Save changes to flash if you wish to make your changes

permanent.