User's Manual

Wireless Array

Configuring the Wireless Array 207

SSID Assignments

This window allows you to select the SSIDs to be bridged by each tunnel. Station

traffic for SSIDs assigned will be bridged through a tunnel regardless of whether

these SSIDs have VLANs defined for them. If there is a VLAN defined for an SSID

that is assigned to a tunnel, then station traffic bridged through that tunnel will be

tagged accordingly.

Figure 120. Tunnel SSID Assignments

Procedure for Assigning SSIDs

This window lists the tunnels and SSIDs that you have defined. SSIDs to be

tunneled do not need to be associated with a VLAN (see “SSID Management” on

page 253).

1. For each tunnel, select the SSIDs that are to be bridged to the remote

endpoint. Clear the checkbox for any SSID that you no longer wish to

include in the tunnel.

2. Click Save changes to flash if you wish to make your changes

permanent.