User's Manual

Wireless Array
206 Configuring the Wireless Array
7. DHCP Option: When this option is enabled, the Array snoops station
DHCP requests and inserts relay agent information (option 82, in the
circuit-ID sub-option) into these DHCP packets. Information inserted
includes Array BSSID, SSID name, and SSID encryption type.
8. MTU: Set maximum transmission unit (MTU) size.
9. Interval: The tunnel mechanism will ping the current remote endpoint
periodically to ensure that it is still reachable. Enter the ping interval (in
seconds).
10. Failures: Enter the number of consecutive ping failures that will cause the
Array to consider the tunnel to be down.
11. Click Save changes to flash if you wish to make your changes
permanent.
12. Proceed to SSID Assignments to define the SSIDs (and associated
VLANs) for which each tunnel will bridge data. You may create up to 16
tunnels. Each will need an SSID/VLAN pair assigned to it so that it can
function properly.