User's Manual

Wireless Array
Configuring the Wireless Array 201
VLAN Management
This window allows you to assign and configure VLANs. After creating a new
VLAN (added to the list of VLANs), you can modify the configuration
parameters of an existing VLAN or delete a selected VLAN. You may create up to
64 VLANs (up to 32 on the XR-500 Series).
Figure 117. VLAN Management

The Wireless Array supports dynamic VLAN assignments specified by
RADIUS policy settings. When RADIUS sends these assignments, the
Array dynamically assigns wireless stations to VLANs as requested.
VLAN tags on traffic are passed through the Array (i.e., VLAN tags are
not stripped). Once a station has been dynamically moved to a new
VLAN, it will be shown in the Stations window as a member of the new
VLAN. (Figure 69 on page 123)
It is critical to configure all VLANs to be used on the Array, even those
that will be dynamically assigned.