User's Manual

Wireless Array
96 Viewing Status on the Wireless Array
The cell size of an IAP is a function of its transmit power and
determines the IAP’s overall coverage. To define cell sizes, go to “IAP
Settings” on page 279. For additional information about cell sizes and
the importance of planning for and defining the optimum cell sizes
for your Array, go to “Coverage and Capacity Planning” on page 30.
• Tx Power: Shows the transmit power for each IAP.
• Rx Threshold: Shows the receive threshold for each IAP.
• Stations: Informs you how many client stations are currently
associated with each IAP.
• WDS Link/Distance: The WDS Link on this radio (if any), and
whether the link has been set to support Long Distance Links. See
“WDS” on page 345.
• MAC Address/BSSID: Shows the MAC address for each IAP.
• Description: The description (if any) that you set for this IAP.
•
 Network Assurance Section
This section shows the results of ongoing network assurance testing. This
is the same as information shown in “Network Assurance” on page 109.
Figure 47. Network Assurance and Operating Status