User's Manual

Wireless Array

Configuring the Wireless Array 237

b. Station MAC Format: Define the format of the Station MAC

RADIUS attribute sent from the Array—lower-case or upper-case,

hyphenated or not. The default is lower-case, not hyphenated.

5. Accounting Settings:

Note that RADIUS accounting start packets sent by the Array will include

the client station's Framed-IP-Address attribute.

a. Accounting Interval (seconds): Specify how often Interim records are

to be sent to the server. The default is 300 seconds.

b. Primary Server Host Name / IP Address: Enter the IP address or

domain name of the primary RADIUS accounting server that you

intend to use.

c. Primary Port Number: Enter the port number of the primary

RADIUS accounting server. The default is 1813.

d. Primary Shared Secret / Verify Secret: Enter the shared secret that

the primary RADIUS accounting server will be using, then re-enter

the shared secret to verify that you typed it correctly.

e. Secondary Server Host Name / IP Address (optional): If desired,

enter an IP address or domain name for an alternative RADIUS

accounting server. If the primary server becomes unreachable, the

Array will “failover” to this secondary server (defined here).

f. Secondary Port Number: If using a secondary accounting server,

enter its port number. The default is 1813.

g. Secondary Shared Secret / Verify Secret: If using a secondary

accounting server, enter the shared secret that it will be using, then re-

enter the shared secret to verify that you typed it correctly.

6. Click Save changes to flash if you wish to make your changes

permanent.