User's Manual

Wireless Array
268 Configuring the Wireless Array
Procedure for Configuring Access Control Lists
1. SSID: Select the SSID whose ACL you wish to manage.
2. Access Control List Type: Select Disabled to disable use of the Access
Control List for this SSID, or select the ACL type — either Allow List or
Deny List.
• Allow List: Only allows the listed MAC addresses to associate to
the Array. All others are denied.
• Deny List: Denies the listed MAC addresses permission to
associate to the Array. All others are allowed.
3. MAC Address: If you want to add a MAC address to the ACL, enter the
new MAC address here, then click the Add button. The MAC address is
added to the ACL. You may use a wildcard (*) for one or more digits to
match a range of addresses. Delete: You may delete selected MAC
addresses from this list by clicking their Delete buttons.
4. Delete All: This button, on the upper left, may be used to delete all the
MAC entries in an ACL.
5. Click Save changes to flash if you wish to make your changes
permanent.

In addition to these lists, other authentication methods (for
example, RADIUS) are still enforced for users.