User's Manual

Wireless Array
256 Configuring the Wireless Array
11. Encryption: From the pull-down list, choose the encryption that will be
required — specific to this SSID — either None, WEP, WPA, WPA2 or
WPA-Both. The None option provides no security and is not
recommended; WPA2 provides the best practice Wi-Fi security.
Each SSID supports only one encryption type at a time (except that WPA
and WPA2 are both supported on an SSID if you select WPA-Both). If you
need to support other encryption types, you must define additional
SSIDs. The encryption standard used with WPA or WPA2 is selected in
the Security>Global Settings window (page 230). For an overview of the
security options, see “Security Planning” on page 47 and “Understanding
Security” on page 209.
12. Global: Check this box if you want this SSID to use the security settings
established at the global level (see “Global Settings” on page 230). Clear
this box if you want the settings established here to take precedence.
.
Figure 139. SSID Management—Encryption, Authentication, Accounting
Additional sections will be displayed to allow you to configure
encryption, RADIUS, and RADIUS accounting settings. The WPA
Set Encryption
Configure Radius, Accounting