User's Manual

Wireless Array
Using Tools on the Wireless Array 371
Using Tools on the Wireless
Array
These WMI windows allow you to perform administrative tasks on your Array,
such as upgrading software, rebooting, uploading and downloading
configuration files, and other utility tasks. Tools are described in the following
sections:
 “System Tools” on page 372
 “CLI” on page 385
 “API Documentation” on page 387
 “Options” on page 392
 “Logout” on page 395
Note that the Too ls menu section may be collapsed down to hide the headings
under it by clicking it. Click again to display the headings. (See Figure 41 on
page 85)
This section does not discuss using status or configuration windows. For
information on those windows, please see:
 “Viewing Status on the Wireless Array” on page 91
 “Configuring the Wireless Array” on page 157

If you are a Cloud XMS customer, then Arrays are managed via the cloud,
and local Array management interfaces are inaccessible.
If the Array is being managed by your own server for XMS Release 6.5 or
above, and if the Array has been assigned to a named network in XMS, you
will be restricted to read-only Array access. See “XMS-Managed Arrays
Restrict Local Management” on page 78.