User Manual
Table Of Contents
- 1) You Need the Following Items
- 2) Choose a Suitable Location
- 3) Prepare the Mounting Location
- 4) Attach the Mounting Plate to the Access Point
- 5) Mount the Access Point on a Pole or Wall
- 6) Ground to Earth Ground
- 7) Install an Antenna
- 8) Prepare the Ethernet Cable with the Waterproof Shell
- 9) Connect the Cables
- 10) Log In to the Access Point
- 11) Configure the Access Point
- 12) Secure Low Level Access to the Access Point
- Drawings
- Customer Support
- Notices, Warnings, & Compliance Statements
- 未命名
XR520H Quick Installation Guide
11) Configure the Access Point
Click Express Setup.
The Access Point will automatically contact Xirrus and obtain its license key, based on its
serial number and MAC address. This auto-licensing function requires the Access Point to
have an Internet connection. A license is needed to enable the full functionality of the Access
Point.
In the Admin Settings section, change both the default admin username and password to
improve Access Point security. Enter New Admin User and New Admin Password, then
Confirm Admin Password. Leave New Admin Privilege Level at read/write. Click Apply
Admin Settings when done.
Be sure to record the new account name and password, because the default admin user
will be deleted!
If you make changes to the SSID Settings section, click the associated Apply button to
apply your changes.
Click Save Changes to Flash on the upper right to save your settings.
- 9 -