User's Manual

Table Of Contents

Wireless Array

Configuring the Wireless Array 343

Links. To allow any Xirrus Array to be accepted as a WDS target, enter the

Xirrus OUI: 00:0f:7d:00:00:00 (this is useful for roaming in a mobile

deployment, as described in Step 3 on page 341.

11. Target SSID: Enter the SSID that the target Array is using.

12. Username: Enter a username for this WDS link. A username and

password is required if the SSID is using PEAP for WDS authentication

from the internal RADIUS server.

13. Password: Enter a password for this WDS link.

14. Clear Settings: Click on the Clear button to reset all of the fields on this

line.

WDS Client Link IAP Assignments:

15. For each desired client link, select the IAPs that are part of that link. The

IAP channel assignments are shown in the column headers.

16. IAP Channel Assignment: Click Auto Configure to instruct the Array to

automatically determine the best channel allocation settings for each IAP

that participates in a WDS link, based on changes in the environment.

These changes are executed immediately, and are automatically applied.