User's Manual

Table Of Contents

Wireless Array

256 Configuring the Wireless Array

See “Group Management” on page 266. Note that if you change the management

HTTPS port, WPR uses that port, too. See “HTTPS” on page 224.

Figure 139. WPR Internal Splash Page Fields (SSID Management)

Note that when users roam between Arrays, their WPR Authentication will

follow them so that re-authentication is not required.

You may select among five different modes for use of the Web Page Redirect

feature, each displaying a different set of parameters that must be entered:

 Internal Login page

This option displays a login page (residing on the Array) instead of the

first user-requested URL. There is an upload function that allows you to

replace the default login page, if you wish. Please see “Web Page

Redirect” on page 368 for more information.

To set up internal login, set Server to Internal Login. Set HTTPS to On

for a secure login, or select Off to use HTTP. You may also customize the

See “Customizing an Internal Login or Splash page” on page 258.

The user name and password are obtained by the login page, and

authentication occurs according to your configured authentication

information (starting with Step 10 on page 251 above). These

authentication parameters are configured as described in “Procedure for

Configuring Network Security” on page 231.