User's Manual

Wireless Array
6 Introduction
XR Wireless Array Product Family
XR500 Series Arrays
These Arrays have one Gigabit Ethernet port and two radios—one multi-state
radio (2.4GH
z or 5GHz) and one 5GHz radio. They support 300Mbps, connecting
up to 240 users at one time.
The XR500 provides flexibility for delivering wireless service in low-to-medium
user density scenarios, in challenging deployments in areas with high RF
attenuation, and in isolated or physically separated locations.
Like other XR Arrays, these models have an integrated controller, firewall, threat
sensor and spectrum analyzer. Unlike other XR Arrays, these models have omni-
directional antennas rather than directional antennas.
XR-1000 and XR-2000 Series Arrays
These Arrays include models with one Gigabit Ethernet port and two or four
multi-state radios (2.4GHz or 5GHz) that can support 300Mbps or 450Mbps,
connecting upwards of 320 users at one time.
The Xirrus XR-1000 Series Wireless Array is a two slot chassis available in a two
multi-state (2.4GHz or 5GHz) radio configuration supporting up to 160 users with
Feature
XR520
No. radios: 802.11 
a/b/g/n/monitor
2
Radio type 2x2
# Integrated omni-directional
antennas
4
Integrated wireless switch ports 2
Integrated RF spectrum analyzer,
threat sensors
Yes
1 Gigabit Uplink Ports 1
Wireless bandwidth 300 Mbps
Users supported 240