User's Manual

Wireless Array
244 Configuring the Wireless Array
 The wireless security mode needed to join this SSID.
 The wireless Quality of Service (QoS) desired for this SSID.
 The wired VLAN associated with this SSID.
As an example, one SSID named accounting might require the highest level of
security, while another named guests might have low security requirements.
Another example may define an SSID named voice that supports voice over
Wireless LAN phones with the highest Quality of Service (QoS) definition. This
SSID might also forward traffic to specific VLANs on the wired network.
See Also
SSID Management
SSIDs
Understanding SSIDs
Understanding QoS Priority on the Wireless Array
Figure 134. Four Traffic Classes

For a complete discussion of implementing Voice over Wi-Fi on the Array,
see the Xirrus Voice over Wireless Application Note in the Xirrus
Resource Center.
Mapping to
Traffic Class
Four Transmit
Queues
Per queue
channel access
Application Data
Voice
Data
Video
Data
Background
Data
Best Effort
Data
IAP (Transmit)
Highest
Priority
Lowest
Priority