User's Manual

Table Of Contents

Wireless Array

Configuring the Wireless Array 241

Procedure for Establishing Rogue AP Control

1. Rogue BSSID/SSID: Enter the BSSID, SSID, or manufacturer string to

match for the new rogue control entry. The Match Only radio buttons

specify what to match (e.g., the MAC address, SSID, or manufacturer).

You may use the “*” character as a wildcard to match any string at this

position. For example, 00:0f:7d:* matches any string that starts with

00:0f:7d:. Xirrus Arrays start with 00:0f:7d: or 50:60:28:. By default, the

Rogue Control List contains two entries that match 00:0f:7d:* and

50:60:28:* and apply the classification Known to all Xirrus Arrays.

2. Rogue Control Classification: Enter the classification for the specified

rogue AP(s), either Blocked, Known or Approved.

3. Match Only: Select the match criterion to compare the Rogue BSSID/

SSID string against: BSSID, Manufacturer, or SSID. The BSSID field

contains the MAC address.

4. Click Create to add this rogue AP to the Rogue Control List.

5. Rogue Control List: If you want to edit the control type for a rogue AP,

just click the radio button for the new type for the entry: Blocked, Known

or Approved.

6. To delete rogue APs from the list, click their Delete buttons.

7. Click Save changes to flash if you wish to make your changes

permanent.