User's Manual

Wireless Array
188 Configuring the Wireless Array
interfaces allows administrators to track usage by various areas. Traffic flow
information may be used to engineer networks for better performance.
Procedure for Configuring NetFlow
1. Enable NetFlow: Select one of the Netflow versions to enable NetFlow
functionality: v5, v9, or IPFIX. Internet Protocol Flow Information Export
(IPFIX) is an IETF protocol (www.ietf.org) performing many of the same
functions as Netflow. Choose Disable if you wish to disable this feature.
2. NetFlow Collector Host (Domain or IP): If you enabled NetFlow, enter
the domain name or IP address of the collector.
3. NetFlow Collector Port: If you enabled NetFlow, enter the port on the
collector host to which to send data.
Wi-Fi Tag
This window enables or disables Wi-Fi tag capabilities. When enabled, the Array
listens for and collects information about Wi-Fi RFID tags sent on the designated
channel. These tags are transmitted by specialized tag devices (for example,
AeroScout Tags). A Wi-Fi tagging server (such as AeroScout) then queries the
Array for a report on the tags that it has received. The Wi-Fi tagging server uses
proprietary algorithms to determine locations for devices sending tag signals.
Figure 112. Wi-Fi Tag

Some features, such as Netflow, are only available if the Array’s license
includes the Xirrus Advanced RF Analysis Manager (RAM). If a setting
is unavailable (grayed out), then your license does not support the feature.
See “About Licensing and Upgrades” on page 361.