User's Manual

Wireless Array
186 Configuring the Wireless Array
5. Setting Time Manually
a. Adjust Time (hrs:min:sec): If you are not using NTP, check this box if
you want to adjust the current system time. When the box is checked,
you may enter a revised time (hours, minutes, seconds, am/pm) in
the corresponding fields. If you don’t want to adjust the current time,
this box should be left unchecked (default).
b. Adjust Date (month/day/year): If you are not using NTP, check this
box if you want to adjust the current system date. When the box is
checked, you may enter a revised date (month, day and year) in the
corresponding fields. If you don’t want to adjust the current date, this
box should be left unchecked (default).
6. Using an NTP Server
a. NTP Primary Server: If you are using NTP, enter the IP address or
domain name of the NTP server.
Figure 110. Time Settings (NTP Time Enabled)
b. NTP Primary Authentication: (optional) If you are using
authentication with NTP, select the type of key: MD5 or SHA1. Select
None if you are not using authentication (this is the default).
c. NTP Primary Authentication Key ID: Enter the key ID, which is a
decimal integer.