User's Manual

Wireless Array
Configuring the Wireless Array 159
Configuring the Wireless Array
The following topics include procedures for configuring the Array using the
product’s embedded Web Management Interface (WMI). Procedures have been
organized into functional areas that reflect the flow and content of the WMI.
The following WMI windows allow you to establish configuration parameters for
your Array, and include:
 “Express Setup” on page 161
 “Network” on page 169
 “Services” on page 184
 “VLANs” on page 199
 “Tunnels” on page 204
 “Security” on page 208
 “SSIDs” on page 242
 “Groups” on page 264
 “IAPs” on page 271
 “WDS” on page 338
 “Filters” on page 344
 “Clusters” on page 352
After making changes to the configuration settings of an Array you must click on
the Save changes to flash button at the top of the configuration window,
otherwise the changes you make will not be applied the next time the Array is
rebooted.

Some settings are only available if the Array’s license includes appropriate
Xirrus Advanced Feature Sets. If a setting is unavailable (grayed out),
then your license does not support the feature. See “About Licensing and
Upgrades” on page 361.