User's Guide

Wireless Array

72 Installing the Wireless Array

license. The Array’s license is not installed at the factory. The Array must have a

license before providing wireless service.

If you need to enter the license manually, use the following procedure. It describes

entering the license key using the WMI. If you are using the Xirrus Management

System (XMS), you may use it to manage and upgrade large numbers of licenses

for the wireless network. XMS Cloud will perform these functions for you

automatically.

1. This procedure assumes that you have pointed a browser to the Array’s

IP address to start WMI, and that you have logged in with the default

username and password above.

2. In the left hand frame, in the Configuration section, click Express Setup.

3. License Key: Enter the key that was provided for the Array. The key was

provided to you in an email as an attachment in the form of an Excel file

(.xls). Enter the key exactly as it appears in the file. Click the Apply

button to apply the key.

4. Now you may verify the features provided by the key. In the Status

section of the left hand frame, click Array and then click Information.

Check the items listed in the License Features row.

Performing the Express Setup Procedure

The Express Setup procedure establishes global configuration settings that enable

basic Array functionality. Changes made in this window will affect all radios. If

you are not using Mobilize to perform your initial configuration, please see

“Express Setup” on page 159. Also see “Zero-Touch Setup Using Mobilize” on

page 67.