Installation Instructions
Table Of Contents
- 1) You Need the Following Items
- 2) Choose a Suitable Location
- 3) Prepare the Mounting Location
- 4) Install the Mounting Plate
- 5) Mount the Array on a Pole or Wall
- 6) Ground to Earth Ground
- 7) Install an Antenna
- 8) Prepare the Ethernet Cable with the Waterproof Shell
- 9) Connect the Cables
- 10) Log In to the Array
- 11) Configure the Array
- 12) Secure Low Level Access to the Array
- Drawings
- Customer Support
- Notices, Warnings, & Compliance Statements
- Software License and Product Warranty Agreement
- Hardware Warranty Agreement
XR-1000H Quick Installation Guide
- 4 -
Oncethestrapissatisfactorilytight,rotatetheBand‐Ittool
backsothatthestrapcannotslidebackthroughthebuckle.
UsingthebuiltincuttingtoolontheBand‐Ittool,cutthe
excessstrap.
Yourinstallationshouldnowappearasshownhere.
Usingahammer,bendbackandflattentheremainingstrap.
Usingahammer,bendandflattenthetwotabsonthe
buckle,sothattheyholdtheflattenedstrapendinplace.
Thecompletedattachmentshouldhavethemountingbracketfirmlyseatedagainstthepole.
Onebandshouldbeenoughformostinstallationshoweverasecondbandcanbeusedfor
additionalmountingsecurity.