Installation Instructions
Table Of Contents
- 1) You Need the Following Items
- 2) Choose a Suitable Location
- 3) Prepare the Mounting Location
- 4) Install the Mounting Plate
- 5) Mount the Array on a Pole or Wall
- 6) Ground to Earth Ground
- 7) Install an Antenna
- 8) Prepare the Ethernet Cable with the Waterproof Shell
- 9) Connect the Cables
- 10) Log In to the Array
- 11) Configure the Array
- 12) Secure Low Level Access to the Array
- Drawings
- Customer Support
- Notices, Warnings, & Compliance Statements
- Software License and Product Warranty Agreement
- Hardware Warranty Agreement
XR-1000H Quick Installation Guide
- 3 -
5) Mount the Array on a Pole or Wall
5a) Pole Mounting
Forpolemounting,Xirrusrecommendsusingmetalstraps(notincludedwiththeArray).The
metalstrapscanbeobtainedfromBAND‐IT‐IDEX,Inc.(www.BAND‐IT‐IDEX.com).Seetheir
websiteforadditionalcontactinformation.CompletethefollowingstepstomounttheArrayto
apole.
Installthemetalbandsthroughtheholesinthemounting
bracket.
HandtightentheBand‐Itstrapthroughthepolemounting
bracket,threaditthroughthestrapbuckleandthenbend
thestrapback.
UsingtheBand‐Ittool,placethetoolontothestrap.
RotatetheBand‐Ittoolsothatitcanpulltheexcessstrap
throughthebuckleandturnthecrankuntilthestrapisvery
tight.