Installation Instructions
Table Of Contents
- 1) You Need the Following Items
- 2) Choose a Suitable Location
- 3) Prepare the Mounting Location
- 4) Install the Mounting Plate
- 5) Mount the Array on a Pole or Wall
- 6) Ground to Earth Ground
- 7) Install an Antenna
- 8) Prepare the Ethernet Cable with the Waterproof Shell
- 9) Connect the Cables
- 10) Log In to the Array
- 11) Configure the Array
- 12) Secure Low Level Access to the Array
- Drawings
- Customer Support
- Notices, Warnings, & Compliance Statements
- Software License and Product Warranty Agreement
- Hardware Warranty Agreement
XR-1000H Quick Installation Guide
- 2 -
KeeptheunitawayfromelectricaldevicesorappliancesthatgenerateRFnoise—atleast3
to6feet(1to2meters).
3) Prepare the Mounting Location
PartofthemechanicalinstallationistoensurethattheArrayisgroundedtoearthgroundto
dissipateanystaticelectricchargethatmaydevelopduetowind.
DetermineagoodelectricalearthgroundpointneartheArraymountinglocation.Ifan
earthgroundpointisnotavailable,consultanelectriciantohaveoneinstalled.
Crimpaterminallugtoasufficientlengthof16gaugewiretoreachfromthemounted
Arraytotheearthgroundpoint.
BeforetheArrayisattachedtoawallorpole,securetheterminallugtotheArraywiththe
#6screwprovidedinthelocationshown.
4) Install the Mounting Plate
Theaccessorykitincludesasmallmountingplate.Mountingplatedimensionsareincludedin
theDrawingssectionattheendofthisguide.Themountingplatecanbeusedforwallorpole
mountingbasedonreversingthesideoftheplateexposed.
For Pole Mounting: For Wall Mounting: