Installation Instructions
Table Of Contents
- 1) You Need the Following Items
- 2) Choose a Suitable Location
- 3) Prepare the Mounting Location
- 4) Install the Mounting Plate
- 5) Mount the Array on a Pole or Wall
- 6) Ground to Earth Ground
- 7) Install an Antenna
- 8) Prepare the Ethernet Cable with the Waterproof Shell
- 9) Connect the Cables
- 10) Log In to the Array
- 11) Configure the Array
- 12) Secure Low Level Access to the Array
- Drawings
- Customer Support
- Notices, Warnings, & Compliance Statements
- Software License and Product Warranty Agreement
- Hardware Warranty Agreement
XR-1000H Quick Installation Guide
- 1 -
XR-1000H Quick Installation Guide
TheXR‐1000HSeriesHardenedWirelessArrayprovidesXirrus
Arraytechnologyinahardenedcaseforinstallationoutdoorsand
inotherharshenvironments.Thisguidedescribeshowtoinstallthe
XR‐1000Honapoleorwallandexecutetheinitialpowerupofthe
Array.Thepoleorwallcanbea structurethatisinstalledatground
leveloronaroof.TheXR‐1000HisnotcompatiblewithotherXirrus
mountingoptions.Foradditionalinformation,seetheWireless
ArrayUser’
sGuide.
ThisdocumentisintendedONLYforXR‐1000HmodelArrays.ForotherXRmodels,
pleaseseetheQuickIn
stallationGuideforthatArrayfamily.
1) You Need the Following Items
AccessoryKit(includedineachWirelessArraycarton)containsmountingbracketandshort
groundwire.
Appropriatetools,bands,screws,and/oranchorsrequiredforthedesiredmounting
location.(notprovidedwiththeArray)
WorkstationwithaWebbrowsertoconfiguretheWirelessArray.
RJ‐45Ethernetconnection(s)toyourwirednetwork.
Power—XR‐1000HArraysarepoweredviaPoweroverGigabitEthernet(PoGE)usingan
EthernetCat5eorCat6cablethatalsocarriesdatatraffic.Youmustprovideanetwork
connectionandEthernetcablerunfromaXirrusPoGEPowerInjectorportfortheArray
Gigabitport.TheXirrusPoGEPowerInjectorrequ
iresanACoutlet.UseonlyXirrus‐
suppliedPoGEinjectors.SeethePoGEInstallationGuideformoreinformation.XR‐1000H
Arraysarepoweredbyoneinjectorportratedat33Worhigher.
2) Choose a Suitable Location
TheXR‐1000HseriesistestedtoIP67waterproofanddustproofrequirementstoprotect
againstseverewetanddustyenvironments.Foroptimalplacement,werecommendthatasite
surveybeperformedbyaqualifiedXirruspartner.
Choosealocationthatisnotsubjectedtosubmersion.
Directsunlightmayraisetheeffectiveambienttemperaturemanydegreesabovetheair
temperature.Itisbesttochoosealocationthathassomelevelofprotectionfromthesun.
ThemaximumcablelengthbetweentheXR‐1000HandtheRJ‐45EthernetNetwork/PoGE
Injectoris100meters.
TheXR‐1000HseriescanoperatefromaWirelessDistributionSystem(WDS)link.However,
theunitwillneedtobeconfiguredviatheEthernetconnectionpriortomountingandpower
muststillbesuppliedviatheRJ‐45Ethernetconnector.