Installation Instructions
Table Of Contents
- 1) You Need the Following Items
- 2) Choose a Suitable Location
- 3) Prepare the Mounting Location
- 4) Install the Mounting Plate
- 5) Mount the Array on a Pole or Wall
- 6) Ground to Earth Ground
- 7) Install an Antenna
- 8) Prepare the Ethernet Cable with the Waterproof Shell
- 9) Connect the Cables
- 10) Log In to the Array
- 11) Configure the Array
- 12) Secure Low Level Access to the Array
- Drawings
- Customer Support
- Notices, Warnings, & Compliance Statements
- Software License and Product Warranty Agreement
- Hardware Warranty Agreement
XR-1000H Quick Installation Guide
- 9 -
11) Configure the Array
ClickExpressSetup
AlicenseisneededtoenablethefullfunctionalityoftheArray.Withoutalicense,theArray
canbepoweredupandwillonlyhaveabasicwirelessnetworkconfigurationincludingjust
oneoperatingradio.TheArray’slicenseisnotinstalledatthefactory.Enterthekeyinthe
LicenseKeyfield.Thekeywasprovidedtoyouinanemailasanatt
achmentintheformof
anExcelfile(.xls).Enterthekeyexactlyasitappearsinthefile.ClicktheApplybutton.
IntheAdminSettingssection,changeboththedefaultadminusernameandpasswordto
improveArraysecurity.EnterNewAdminUserandNewAdminPassword,then Confirm
AdminPassword.LeaveNewAdminPrivilegeLevelatread/write.ClickApplyAdmin
Settingswhendone.
Besuretorecordthenewaccountna
meandpassword,becausethedefaultadminuser
willbedeleted!
IfyoumakechangestotheSSIDSettingssection,clicktheassociatedApplybuttonto
applyyourchanges.