Installation Instructions

Table Of Contents

XR-1000H Quick Installation Guide

- 6 -

7) Install an Antenna

NOTE:UseonlyXirrus‐approvedexternalantennassuppliedbythemanufactureror

purchasedfromXirrus.AlsoseetheNoticesandWarningsregardingexternalantennas

intheWarning&Noticessectionofthisguide.

Lowlosscableisavailable suchthattheantennacanbemountedinanappropriatelocationthat

couldbeseveralfeetaw

ayfromtheArray.UseoneofthefollowingXirrus‐approvedantennas:

 MIMOOmnidirectionalAntennawithN‐StylePlugConnectors

 2.4/5.8GHzDualPolarizedPanelAntenna

EitherantennacanbepurchasedfromXirrusorfromtheantennamanufacturer.

Antenna Xirrus Manufacturer

MIMO Omnidirectional

Antenna with N-Style Plug

Connectors

Part #: ANT-OMNI-MIMO-01

Description: 6dBi dual band 3

x 3 omni-directional antenna

Part #: M6060060MO1D33607

Manufacturer: Terrawave

Solutions

(www.terrawave.com)

2.4/5.8GHz Dual Polarized

Panel Antenna

Part #: ANT-DIR-MIMO-01

Description: 14dBi, dual band

polarized 3 x 3 panel antenna

Part #: HG2458-14DP-3NF

Manufacturer: L-COM, Inc.

(WWW.L-COM.COM)

TheMIMOOmnidirectionalantennaincludesanL‐Bracketformastorwallmounting.The

DualPolarizedPanelantennaissuppliedwithatiltandswivelmastmountkit.

FortheDualPolarizedPanelAntennaN‐Femaleconnectorinterface,youwillneedamale‐to‐

malecabletoconnecttheantennatotheArray.ThiscablecanbeorderedfromXirrus(Cable

PartNumber:ANT‐CA

B‐400‐2‐MM)orfromthemanufacturer(L‐COMPartNumber:CA‐

NMRNMF002).

8) Prepare the Ethernet Cable with the Waterproof Shell

 Placethesplitwasherandsplitrubbergrommetoverthecable.

 Slideallthesectionstogetherandtightenthenutontheendto5kgbutnotmorethan8kg

torqueforcetoinsureawatertightfit.

  