User Guide Part 2

Wi-Fi Array
Configuring the Wi-Fi Array 253
IAPs
This status-only window summarizes the status of the Integrated Access Points
(radios). For each IAP, it shows whether it is up or down, the channel and antenna
that it is currently using, its cell size and transmit and receive power, how many
users (stations) are currently associated to it, whether it is part of a WDS link, and
its MAC address.
Figure 137. IAPs
There are no configuration options in this window, but if you are experiencing
problems or simply reviewing the IAP assignments, you may print this window
for your records. Click any IAP name to open the associated configuration page.
Arrays have a fast roaming feature, allowing them to maintain sessions for
applications such as voice, even while users cross boundaries between Arrays.
Fast roaming is set up in the Global Settings (IAP) window and is discussed in:
z
“Understanding Fast Roaming” on page 254
IAPs are configured using the following windows:
z
“IAP Settings” on page 255
z
“Global Settings (IAP)” on page 260
z
“Global Settings .11a” on page 267
z
“Global Settings .11bg” on page 269