User Guide Part 2

Wi-Fi Array
The Command Line Interface 333
fips
The fips command [Xirrus_Wi-Fi_Array(config)# fips] is used to set the
parameter values required for FIPS 140-2, Level 2 security. For more information,
see Appendix E: Implementing FIPS Security.
Command Description
disable Reverts FIPS settings to the values they had before
performing a fips on command.
FORMAT:
fips disable
enable Set FIPS security on the Array. Remembers the
values of parameters prior to setting them.
FORMAT:
fips enable
off Reverts FIPS settings to the values they had before
performing a fips on command.
FORMAT:
fips off
on Set FIPS security on the Array. Remembers the
values of parameters prior to setting them.
FORMAT:
fips on