User Guide Part 1

Wi-Fi Array
Introduction 21
Electrical Each Array supports both AC and PoGE
AC Input Power: 100-240VAC at 50-60 Hz
PoGE (DC) Input Power: Power over Gigabit
Ethernet—no splitter required, 48VDC,
Maximum 2A
Nominal Power:
XN16: 90W
XN12: 75W
XN8: 60W
All Models:
For PoGE, see “Power over Gigabit Ethernet
Compatibility Matrix” on page 414.
Interfaces Serial Console Port:
1 x RS232 – RJ45 connector, for local
configuration
Ethernet Interfaces:
2 x Gigabit 100/1000 Mbps uplink ports for link
aggregation, redundancy, or bridging
1 x Fast Ethernet 10/100 Mbps, for out of band
management
Status LEDs:
System status, Ethernet, Radio
Networking DHCP client, DHCP server (multiple DHCP
pools), DNS Client, NTP client, NAT
Element Specifications