User Guide Part 1

Wi-Fi Array
224 Configuring the Wi-Fi Array
Procedure for Configuring Access Control Lists
1. Access Control List Type: Select Disabled to disable the Access Control
List, or select the Access Control List type—either Allow List or Deny
List. Then click Apply to apply your changes.
• Allow List: Only allows these MAC addresses to associate to the
Array.
• Deny List: Allows all MAC addresses except the addresses
defined in this list.
2. MAC Address: If you want to add a MAC address to the ACL, enter the
new MAC address here, then click on the Create button. The MAC
address is added to the ACL.
3. Delete: You can delete selected MAC addresses from this list by checking
their Delete buttons, then clicking Apply or Save.
4. Click on the Apply button to apply the new settings to this session, or
click Save to apply your changes and make them permanent.
See Also
External Radius
Global Settings (IAP)
Internal Radius
Management Control
Security
Station Status Windows (list of stations that have been detected by the Array)
#
In addition to these lists, other authentication methods (for
example, RADIUS) are still enforced for users.