User Guide Part 1

Wi-Fi Array

202 Configuring the Wi-Fi Array

11. SNMP Read-Only Username: Enter the read-only user name. This

username and password do not allow configuration changes to be made

on the Array. The default is xirrus-ro.

12. SNMP Read-Only Authentication Password: Enter the read-only

password for authentication (i.e., logging in). The default is xirrus-ro.

13. SNMP Read-Only Privacy Password: Enter the read-only password for

privacy (i.e., a key for encryption). The default is xirrus-ro.

14. SNMP Trap Host IP Address: Enter the IP Address or domain name, as

well as the Port number, of an SNMP management station that is to

receive SNMP traps. You may specify up to four hosts that are to receive

traps.

15. Send Auth Failure Traps: Choose Yes to log authentication failure traps

or No to disable this feature.

16. Click on the Apply button to apply the new settings to this session, or

click Save to apply your changes and make them permanent.