User Guide Part 1

Wi-Fi Array

190 Configuring the Wi-Fi Array

DNS Settings

This window allows you to establish your DNS (Domain Name System) settings.

The Array uses these DNS servers to resolve host names into IP addresses. The

Array also registers its own Host Name with these DNS servers, so that others

may address the Array using its name rather than its IP address. Note that the

DNS servers defined here are not used by wireless clients—servers for stations

associated to the Array are defined along with DHCP pools. See “DHCP Server”

on page 203. When finished, click on the Apply button to apply the new settings

to this session, or click Save to apply your changes and make them permanent.

Figure 110. DNS Settings

Procedure for Configuring DNS Servers

1. DNS Host Name: Enter a valid DNS host name.

2. DNS Domain: Enter the DNS domain name.

3. DNS Server 1: Enter the IP address of the primary DNS server.

4. DNS Server 2 and DNS Server 3: Enter the IP address of the secondary

and tertiary DNS servers (if required).

5. Click on the Apply button to apply the new settings to this session, or

click Save to apply your changes and make them permanent.