User Guide Part 1

Wi-Fi Array

Viewing Status on the Wi-Fi Array 151

Stations

This status-only window shows client stations currently visible to the Array. You

may choose to view only stations that have associated to the Array, or only

stations that are not associated, or both, by selecting the appropriate checkboxes

above the list. The list shows the MAC address of each station, its NetBIOS name,

its IP address, its manufacturer, the SSID used for the association, the Group (if

any) that this station belongs to, its VLAN, its QoS, the IAP used for the

association, transmit and receive rates, the RSSI for each station, and how long

each association has been active (up time).

You may click the Detail checkbox at the bottom of the window to show a number

of additional columns, including security settings used by the connection, the

channel and band used, and additional RF measurements.

Figure 81. Stations

You may sort the rows based on any column that has an active column header,

indicated when the mouse pointer changes to the hand icon . Click again to

reverse the sort order. You may select a specific station and perform one of the

following actions by clicking the associated button:

Deny Access: Sends a de-authentication frame to the selected station and

explicitly denies it access by adding its MAC address to the Deny List in

the Access Control List window. To permit access again, go to “Access

Control List” on page 223 and delete the station from the Deny list.

Deauthenticate: Sends a de-authentication frame to the selected station.

The station may re-authenticate.