User Guide Part 1

Wi-Fi Array
Installing the Wi-Fi Array 87
Secure the T-Bar Clips to the Ceiling Support Grid
The mounting template should be oriented so that the Array’s abg(n)2 omni-
directional monitoring IAP (radio) is pointing in the direction of the least required
wireless signal coverage—for example, a nearby exterior wall or entrance.
Figure 38. Attaching the T-Bar Clips to the Ceiling Grid
Use the mounting template to find the correct location for all four T-bar clips, then
twist the clips onto the metal ceiling support grid (Figure 38). Tighten the screw
posts to 10-12 lbf.ft (1.38-1.66 kgf.m). Do not overtighten the screw posts. Disengage
the template from the four screw posts and remove the template from the ceiling.
Ceiling tile grid
T-bar clips (4 places)
Tighten the screw post
Template