User Guide

Wi-Fi Array
Configuring the Wi-Fi Array 233
SSIDs
This is a status only window that allows you to review SSID (Service Set
IDentifier) assignments. It includes the SSID name, whether or not an SSID is
visible on the network, any security and QoS parameters defined for each SSID,
associated VLAN IDs, radio availability, and DHCP pools defined per SSID. You
may click on an SSID’s name to jump to the edit page for the SSID. There are no
configuration options available on this page, but if you are experiencing problems
or reviewing SSID management parameters, you may want to print this page for
your records.
For information to help you understand SSIDs and how multiple SSIDs are
managed by the Wi-Fi Array, go to “Understanding SSIDs” on page 234 and the
Multiple SSIDs section of “Frequently Asked Questions” on page 400. For a
description of how QoS operates on the Array, see “Understanding QoS Priority
on the Wi-Fi Array” on page 235.
Figure 132. SSIDs
The read-only Limits section of the SSIDs window allows you to review any
limitations associated with your defined SSIDs. For example, this window shows
the current state of an SSID (enabled or not), how much SSID and station traffic is
#
For a complete discussion of implementing Voice over Wi-Fi on the Array,
see the Xirrus Voice over Wi-Fi Application Note in the Xirrus Library
.