User Guide

Wi-Fi Array
416 Appendix C: Technical Support
Power over Gigabit Ethernet Compatibility Matrix
The Xirrus Power over Gigabit Ethernet (PoGE) solution includes different
modules to be used with particular Array models. The following two tables
indicate the proper PoGE injector/splitters to use with each Array. X indicates
products are INCOMPATIBLE. NA=Not Applicable.
Table 1: Current PoGE Injectors/Splitters
#
IMPORTANT NOTE: Only use -H versions of injectors/splitters together,
and use non-H versions of injectors/splitters together - do not mix or match
the two types.
Array Model
Compatible
Xirrus Injector/Splitter
XP1-MSI-X
Injector
XP8-MSI
Injector
XP1-MSI
Injector
XP1-SPL
Splitter
XN4, XS4 Works with any PoGE
injector/splitter
3333
XS8 Works with any PoGE injector,
no splitter required
333 NA
XN16/XN12/
XN8, XS16/
XS12
Works with two injector
options, no splitter required
33 X NA
XS-3500-4 Works with any PoGE
injector/splitter
3333
XS-3700-8, DC
(modified)
1
1. To see whether an Array is modified, see Figure 189 on page 418.
Works only with legacy
injector/splitter models, see
Table 2.
X X XX
XS-3900-16, DC
(modified)
1
X X XX
XS-3700-8, DC
(unmodified)
DO NOT connect unmodified
XS-3700/3900 with -H or -HX
injectors or splitter.
X
333
XS-3900-16, DC
(unmodified)
X 333