User Guide

Wi-Fi Array
198 Configuring the Wi-Fi Array
SNMP
This window allows you to enable or disable SNMP v2 and SNMP v3 and define
the SNMP parameters. SNMP v2 allows remote management of the Array by the
Xirrus Management System (XMS). SNMP v3 was designed to offer much
stronger security. You may enable either SNMP version, neither, or both. If you
enable both, be aware that data and keys are not encrypted when SNMPv2 is
used.
NOTE: If you are managing your Arrays with XMS (the Xirrus Management System),
it is very important to use SNMP v2 and the correct Read-Write Community String
for proper operation of XMS with the Array. Both XMS and the Array must have the
same value for this string.
Figure 118. SNMP