User Guide

Wi-Fi Array

Configuring the Wi-Fi Array 193

b. Adjust Date (month/day/year): If you are not using NTP, check this

box if you want to adjust the current system date. When the box is

checked, the date fields become active. Enter the revised date (month,

day and year) in the corresponding fields. If you don’t want to adjust

the current date, this box should be left unchecked (default).

5. Using an NTP Server

a. NTP Primary Server: If you are using NTP, enter the IP address or

domain name of the NTP server.

Figure 115. Time Settings (NTP Time Enabled)

b. NTP Secondary Server: Enter the IP address or domain name of an

optional secondary NTP server to be used in case the Array is unable

to contact the primary server.

6. Click on the Apply button to apply the new settings to this session, or

click Save to apply your changes and make them permanent.