User Guide

Wi-Fi Array
Configuring the Wi-Fi Array 191
Services
This is a status only window that allows you to review the current settings and
status for services on the Array, including DHCP, SNMP, Syslog, and Network
Time Protocol (NTP) services. For example, for the DHCP server, it shows each
DHCP pool name, whether the pool is enabled, the IP address range, the gateway
address, lease times, and the DNS domain being used. There are no configuration
options available in this window, but if you are experiencing issues with network
services, you may want to print this window for your records.
Figure 113. Services
The following sections discuss configuring services on the Array:
z “Time Settings (NTP)” on page 192
z “NetFlow” on page 194
z “System Log” on page 195
z “SNMP” on page 198
z “DHCP Server” on page 201