User Guide

Wi-Fi Array

188 Configuring the Wi-Fi Array

DNS Settings

This window allows you to establish your DNS (Domain Name System) settings.

At least one DNS server must be set up if you want to offer clients associating

with the Array the ability to use meaningful host names instead of numerical IP

addresses. When finished, click on the Apply button to apply the new settings to

this session, or click Save to apply your changes and make them permanent.

Figure 111. DNS Settings

Procedure for Configuring DNS Servers

1. DNS Host Name: Enter a valid DNS host name.

2. DNS Domain: Enter the DNS domain name.

3. DNS Server 1: Enter the IP address of the primary DNS server.

4. DNS Server 2 and DNS Server 3: Enter the IP address of the secondary

and tertiary DNS servers (if required).

5. Click on the Apply button to apply the new settings to this session, or

click Save to apply your changes and make them permanent.