User Guide

Wi-Fi Array

170 Viewing Status on the Wi-Fi Array

You can Refresh the data (update the window with the latest information) at any

time by clicking on the appropriate button. You can also click in the Auto Refresh

check box to instruct the Array to refresh this window automatically.

Note that you can clear the data for an individual station (see below), but you

cannot clear the data for all stations using this window.

See Also

Per-Station Statistics

This window provides detailed statistics for the selected station. Receive and

Transmit statistics are listed by Rate—this is the data rate in Mbps. For a

summary of statistics for all stations, see “Station Statistics” on page 169.

You can Refresh the data (update the window with the latest information) or

Clear the data (reset all content to zero and begin counting again) at any time by

clicking on the appropriate button. You can also click in the Auto Refresh check

box to instruct the Array to refresh this window automatically.

Figure 101. Individual Station Statistics Page